Table of Contents
Advertisement
SPECIAL PLAYBACK 2
Alarm Search
To go to the beginning of a desired alarm recording.
1
Press the SEARCH/AUDIO ON button during stop
mode.
"AL SEARCH 01" will be displayed on screen.
°
2
Press the REC/PLAY SPEED l (or j) button to
set the desired alarm number (1 to 99), then press
the FF/CUE (or REW/REVIEW) button.
The desired alarm is searched and a still
°
image of the beginning of the alarm recording
will appear on-screen.
NOTE:
GB
•
The alarm number is relative to the actual tape
position. (Please refer to the illustration below.)
Alarm number 2
Alarm trigger input point
Rewind direction
3
Press the PLAY button.
Playback will start.
°
Alarm Scan
To look for an alarm recording by viewing the first 5
seconds of each alarm recording.
1
Press the SEARCH/AUDIO ON button twice during
stop mode.
"AL SCAN" will be displayed on screen.
°
2
Press the FF/CUE (or REW/REVIEW) button.
The unit will advance (or rewind) the tape at
°
high speed and playback the first 5 seconds of
every alarm recording.
To cancel the alarm scan mode, press the
°
STOP button.
3
While the desired recording is being played back,
press the PLAY button.
Playback will start, alarm scan mode is
°
cancelled.
NOTE:
•
The alarm scan and alarm search functions will only
be possible if the recording speed was set to 3-hour
mode and the recording duration to 20 seconds or
more.
English
Playback
1
1
2
Fast-forward direction
Actual position
Day/Time Search
To search for a recording when the date and time the
recording was performed on are known.
1
Press the SEARCH/AUDIO ON button three times
during stop mode.
"T/D SEARCH 01 00" will be displayed on
°
screen.
Date/Time Search Example
0H25M39S
T/D SEARCH
01
15
2
Press the REC/PLAY SPEED l (or j) button to
set the desired day, then press the SHIFT « button.
3
Press the REC/PLAY SPEED l (or j) button to
set the desired hour.
4
Press the FF/CUE (or REW/REVIEW) button.
The desired day/time is searched and a still
°
image of the recording will appear on-screen.
5
Press the PLAY button.
Playback will start.
°
NOTES:
•
If during a search the end of the tape is reached, the
tape will rewind and stop. If the beginning of the tape
is reached, it will stop.
•
Day/time search may not function properly on tapes
used for alarm recording.
•
The day/time search function may not operate
correctly if searching for a timer recording time or
CLOCK ADJUSTMENT time.
25
Time
Day
Advertisement
Table of Contents
