Samsung 5 series User Manual page 6

The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable
N
Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI
cable and there is no sound, connect the HDMI cable to the HDMI IN 1 jack and the audio cables to the PC/DVI(HDMI
1)[AUDIO] jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player /
Cable Box / Satellite receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not 1.3
may cause annoying flicker or no screen display.
8 COMPONENT IN
– Connect component video cables (optional) to component connector (P
to corresponding component video out connectors on the DTV or DVD.
– If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)
and connect the DTV (or DVD) to component connector (P
– The P , P and Y connectors on your component devices (DTV or DVD) are sometimes labelled Y, B-Y and R-Y or Y, Cb
R B
and Cr.
– Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio
out connectors on the DTV or DVD.
9 EXT
Connector
Video
EXT O
– Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
0 SERVICE
– Connector for software upgrades.
! AV IN [VIDEO] / [R-AUDIO-L]
– Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
– Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the
A/V device.
@ COMMON INTERFACE Slot
– When not inserting 'CI CARD' in some channels, 'Scrambled Signal' is displayed on the screen.
– The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please contact your service provider.
– When the channel information configuration has finished, the message 'Updating Completed' is displayed, indicating that
the channel list is now updated.
You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your
N
hands since dropping the CI CARD may cause damage to it.
Insert the CI-Card in the direction marked on it.
N
The place of the COMMON INTERFACE Slot may be different depending on its model.
N
CAM is not supported in some countries and regions, check with your authorized dealer.
N
Input
Audio (L / R) RGB
O O
English - 4
, P , Y) on the rear of your set and the other ends
R B
, P , Y) on your set.
R B
Output
Video + Audio (L / R)
Only TV or DTV output is available.