Table of Contents
Advertisement
PARSIFAL OVATION
R.1.0
Safety Instructions
In these safety instructions the word "product" refers to the
Verity Audio Parsifal Ovation Monitor and Woofer and all
accessories.
1.
Read Instructions — All the safety and operating
instructions should be read before the product is operated;
2.
Retain Instructions — The safety and operating
instructions should be retained for future reference;
3.
Head Warnings — All warnings on the product and in
the owner's manual should be followed;
4.
Follow Instructions — All operating and maintenance
instructions should be followed;
5.
Cleaning — Unplug this product from your power
amplifier before cleaning. Do not use liquid or aerosol
cleaners. The product should be cleaned only as
recommended in this manual;
6.
Accessories — Do not use accessories not
recommended in this manual as they may be hazardous;
7.
Water and Moisture — Hazard of electric shock —
Do not use this product near water or in rainy / moist
situations;
8.
Heat — Avoid placing the speakers near a heat
source;
9.
Placing or moving — Do not place on an unstable
cart, stand, tripod, bracket, or table. The product may fall
causing serious injuries, and serious damage to the
product. A product with cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product cart combination
to overturn;
10.
Placing or moving — The monitor cabinet is NOT
attached to the woofer module. It only holds by gravity
and with the help of cushion pads. Attempting to move
the product without removing the monitor cabinet could
cause the later to fall and create serious injuries. Before
moving your product, always remove the monitor cabinet;
11.
Power amplifier — Hazard of electric shock — Do
not manipulate, move, clean or disconnect your product
while your power amplifier is turned on;
12.
Moving when Packed — The product comes packed
in two ATA flight cases. These cases are heavy and cannot
be carried by a single person. Attempting to move a
transportation case alone could cause serious injuries;
VERITY AUDIO
13.
Spikes — The underneath product spikes assure a
tight coupling with the floor. They are razor-sharp and
must be manipulated with extreme care. Do not move the
product while the product spikes are installed. The
product spikes should be removed before moving the
product;
14.
Input power — To reduce the risk of fire or electric
shock, do not allow an input power over 350 watts RMS
(37.4 volts) to the product;
15.
Unpacking and Packing Instructions — The product
should be packed and / or unpacked only as indicated on
the packing/unpacking instruction sheets;
16.
Ancillary equipment — Do not connect or play the
product before making certain that the associated
equipments are in good condition;
17.
Object and Liquid Entry — Never push object of any
kind into this product through openings as they may touch
dangerous voltage points or short out parts that could
result in a fire or electric shock. Do not spill liquid of any
kind onto or into the product;
18.
Servicing — Do not attempt to service the product
yourself. Refer all servicing to qualified service personnel;
19.
Damage Requiring Service — Turn off your power
amplifier(s) and disconnect all cables from the product,
and refer servicing to qualified service personnel under
the following conditions:
a.
When the product exhibits a distinct change in
performance;
b.
If any liquid has been spilled into, or objects have
fallen into, the product;
c.
If the product has been exposed to rain or water;
d.
If the product does not operate normally even if you
follow the operating instructions. Connect only your
product as recommended in your owner's manual.
Improper connections may result in damage and will
often require extensive work by a qualified
technician to restore the product to its normal
operation;
e.
If the product has been dropped or the cabinet has
been damaged.
20.
Replacement Parts — When replacement parts are
required, make sure the service technician use only
original parts as specified by Verity Audio. Unauthorized
substitution may result in fire, electric shock or other
hazards;
21.
Safety Check — Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is in
safe operating order.
OWNER'S MANUAL
April 2005
PAGE 3
Advertisement
Table of Contents
