Download
Share
Print this page
  1. Manuals
  2. Brands
  3. JK Audio Manuals
  4. Amplifier
  5. RemoteAmp Blue
  6. User manual

JK Audio RemoteAmp Blue User Manual

Wireless headphone amplifier
Hide thumbs Also See for RemoteAmp Blue:

Advertisement

Quick Links

Download this manual
RemoteAmp Blue
Wireless Headphone Amplifier
User Guide
JK Audio

Advertisement

loading
Need help?

Need help?

Do you have a question about the RemoteAmp Blue and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for JK Audio RemoteAmp Blue

Summary of Contents for JK Audio RemoteAmp Blue

  • Page 1 RemoteAmp Blue Wireless Headphone Amplifier User Guide JK Audio...
  • Page 2 A2DP stereo mode. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JK Audio, Inc. is under license. Other trademarks and trade names are those of their respective owners.

  • Page 3: Safety Precautions

    Doing so may hinder your hearing and can be hazardous on the roadways or at pedes- trian crossings. Note: While RemoteAmp Blue was designed to be very rugged and durable, it is not waterproof and care should be taken to keep the unit dry.
  • Page 4 Features 1. This control will adjust the combined level of audio from the 3.5 mm Stereo Line In and the XLR Line In jacks. 2. This LED flashes red when the RemoteAmp Blue has a stereo listen-only audio connection to your Bluetooth device. If the music is...
  • Page 5 Features paused, such as when you receive an incom- ing phone call, the red stereo LED will turn off until the music resumes playing. 3. This LED flashes blue when setting up or using a Bluetooth connection. See page 11 for timing diagrams.
  • Page 6 Connection 1. Connect your headphones to this 1/4” jack. The 1 watt stereo headphone output gives you a mix of the XLR line input, 3.5 mm Stereo Line In and Bluetooth audio. 2. The unbalanced 3.5 mm stereo Earpiece out- put jack provides a mix of the XLR Line input, 3.5 mm Stereo Line In and Bluetooth audio.
  • Page 7 Connection...

  • Page 8: Bluetooth Wireless Technology

    (Multi-Function Button or MFB) on RemoteAmp Blue for a full 5 seconds and release. The blue LED will flash rap- idly, about every 100 ms, as RemoteAmp Blue enters Pairing Mode. There is a difference between “Pairing Mode” and “Idle Mode”.
  • Page 9 Enter the pin number as "0000". When bonding is complete, the blue LED will flash at a rate of 1 sec on, 2 sec off. Once RemoteAmp Blue has been added to your cell phone, subsequent connections can be made more quickly from Idle Mode.
  • Page 10 Bluetooth wireless audio connection. The Wireless Headset mode offers up to 20 kHz audio bandwidth. RemoteAmp Blue supports A2DP (Sink), Hands Free and Headset profiles with BlueCore 5- Multimedia technology. You will be able to receive full bandwidth stereo audio from any cell phone that supports A2DP.
  • Page 11 Bluetooth Wireless Technology Bluetooth LED pattern to initiate Bonding Initialize Idle Mode Pairing Mode 2 sec off, 2 sec off, 100 ms off, 2 sec on 200 ms on 100 ms on Hold Bluetooth MFB in at least 5 sec to reach Pairing Mode the first time a new device is connected, >...
  • Page 12 25 feet from your Bluetooth device. How long will the battery last? Based on our tests using a standard alkaline bat- tery, with RemoteAmp Blue about 1 meter from a Bluetooth device the battery should last for about 10 hours under normal use.
  • Page 13 Block Diagram...

  • Page 14: Specifications

    Specifications Inputs: Female XLR: Balanced, 20k ohms, 0 dBu nom. 3.5mm Stereo Line In: Unbalanced, 20k ohm, -10 dBu nom. Outputs: Stereo Earpiece: Unbalanced, 3.5mm, 100 ohms, 40 mW, 20 Hz - 20 kHz Stereo Headphone: 1/4”, 8 ohms, 1 watt per channel, 20 Hz - 20 kHz Bluetooth Standard:...
  • Page 15 Changes or modifications not expressly approved by JK Audio can void the user's authority to operate the equipment. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

  • Page 16: Warranty

    THERE ARE NO EXPRESSED OR IMPLIED WARRANTIES WHICH EXTEND BEYOND THE WARRANTY HERE MADE. 7/08 JK Audio, Inc. 1311 E 6th Street, Sandwich, IL 60548 USA Voice: (815) 786-2929 Toll Free: 800-JK-Audio Fax: 815-786-8502 info@jkaudio.com www.jkaudio.com ©...