Advertisement
Quick Links
Advertisement
Related Manuals for JK Audio RemoteAmp Two
Summary of Contents for JK Audio RemoteAmp Two
- Page 1 RemoteAmp Two Stereo Headphone Amplifier User Guide JK Audio...
- Page 2 Description JK Audio combines professional audio electron- ics in a rugged new belt pack design. RemoteAmp Two provides a listen only connec- tion for mono IFB or for listening to full band- width stereo music. Separate volume controls for the XLR and 3.5 mm line input jacks allow a simple mix of mono and stereo sources.
- Page 3 Safety Precautions RemoteAmp contains headphone amplifier that is more powerful than a consumer prod- uct. JK Audio products are de- signed for the broadcast industry. The broadcast professional must be able to hear headphone signals over ambient noise level. From the cheering crowd at a foot-...
- Page 4 Features...
- Page 5 Features 1. This control will adjust the level of audio from the XLR Line In jack. 2. This control will adjust the level of audio from the 3.5 mm Stereo Line In jack. 3. This red LED indicates when the power is turned on.
- Page 6 Connection 1. Connect your headphones to this 1/4” jack. The 1/2 watt stereo headphone output gives you a mix of the XLR line input and the 3.5 mm Stereo Line In. 2. The unbalanced 3.5 mm stereo Earpiece output jack provides a mix of the XLR Line input and the 3.5 mm Stereo Line In.
- Page 7 Connection...
- Page 8 FAQs Can I connect a microphone to the XLR input jack? No, this input is line level only. You need to connect your mic to a mixer or pre amp first. Can I mix sound clips from my personal audio player with the audio from my mixing console? Yes, you can use both the balanced XLR and unbalanced 3.5 mm inputs simultane-...
- Page 9 FAQs How long will the battery last? Based on our tests with the RemoteAmp Two, a standard alkaline battery should last for about 20 hours under normal use. Lithium batteries can significantly increase the battery life, but at a higher cost. As an indicator of low battery, the red Power LED will grow dim and then extinguish a short while before the battery is completely ex-...
- Page 10 Block Diagram...
-
Page 11: Specifications
4.7” x 3.75” x 1.65” (12 x 9.5 x 4.2 cm) Weight: 10 ounces (275 grams) Note: While RemoteAmp Two was designed to be very rugged and durable, it is not waterproof and care should be taken to keep the unit dry. -
Page 12: Warranty
THERE ARE NO EXPRESSED OR IMPLIED WARRANTIES WHICH EXTEND BEYOND THE WARRANTY HERE MADE. 07/08 JK Audio, Inc. 1311 E 6th Street, Sandwich, IL 60548 USA Voice: (815) 786-2929 Toll Free: 800-JK-Audio Fax: 815-786-8502 info@jkaudio.com www.jkaudio.com ©...
Need help?
Do you have a question about the RemoteAmp Two and is the answer not in the manual?
Questions and answers