For Your Safety; Esd Protection - Nokia 2505 Service Manual

Nokia Customer Care
QUALIFIED SERVICE
Only qualified personnel may install or repair phone equipment.
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do not connect incompatible
products.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
Nokia requires that product service points have sufficient
ESD protection (against static electricity) when servicing products.
Any product of which the covers are removed must be handled with
ESD protection. The SIM card can be replaced without ESD
protection if the product is otherwise ready for use.
To replace the covers ESD protection must be applied.
All electronic parts of the product are susceptible to ESD.
Resistors, too, can be damaged by static electricity discharge.
All ESD sensitive parts must be packed in metallized protective bags
during shipping and handling outside any ESD Protected Area
(EPA).
Every repair action involving opening the product or handling the
product components must be done under ESD protection.
ESD protected spare part packages MUST NOT be opened/closed
out of an ESD Protected Area.
For more information and local requirements about ESD protection
and ESD Protected Area, contact your local Nokia After Market
Services representative.
Issue 1 04/2007

For Your safety

ESD protection

© 2007 Nokia Corporation Company Confidential
2505 (RM-307)
Page 7