Page 3
(17, 18, and 19) are through the side panel D. Slide the other ends of the player rods through the other side panel (22) and attach to the end panel (23) using the leg bolt (#4) and leg washer (#5). 10/04 P/N 211011...
Page 4
1/2" round head screw (2). Affix the plastic goal box (27) to the end panel with the 1/2" round head screw (2). Connect the plastic ball catcher and plastic goal box with the ball runner (29). * Repeat for opposite corner P/N 211011 10/04...
Page 5
A. Attach the legs (26) to the side (22) and end (23) panels with the leg bolt (4) and leg washer (5). Screw the 3/4" round head screw (3) into the playfield in the pre-drilled holes near the goal. B. Screw the leg levelers (32) into the bottom of the legs. 10/04 P/N 211011...
Page 6
C. Slide the handles (13) onto the ends of the player rods with the small holes in the end. Slide the rod caps (12) onto the player rods opposite the handles. D. Insert the ball entry cups (30) into the circular holes in the side panel (22) and secure with the 1/2" round-head screw (2). P/N 211011 10/04...