Amped Wireless REC10 User Manual page 33

REC10 USER'S GUIDE
Connection State: The Connection State will say
"Connected" when there are no problems with the
connection to your Home Network.
If the Connection State shows "Waiting for Keys" then
the WPA/WPA2 security key you entered is incorrect.
If the Connection State shows "Scanning" the Range
Extender may be too far away from your home/office
router.
The Signal Strength display can be updated by
refreshing the page and is a good tool to use for finding the optimal installation location. A signal strength of
70% or greater is recommended for stable operation of the Range Extender.
Extended Wi-Fi Network Settings: Shows the current settings for your Extended Wi-Fi Network.
Range Extender IP Settings: The network IP settings for your Range Extender will change as you connect and
disconnect from your Home Network. When connected to your Home Network, the network IP settings will be
assigned by your Home Network. When not connected, the Range Extender will use its own default network IP
settings.
32