Advertisement
3.
Malfunctions
For the malfunctions described here, we assume that only the end components
come into question for the cause of the malfunction. If the fault still occurs after
the end component has been replaced, then it is necessary to pay a visit to your
dealer.
3.1
Lights
3.1.1.
Indicators
If a lamp is faulty, then the blinker frequency is twice as fast.
Front indicator bulb: should only be changed by the dealer. It is necessary to remove
Rear indicator bulb: Unscrew and remove the cross-head screw from the indicator cover.
3.1.2
Front lights
Should be changed by the dealer, only. It is necessary to remove main panels!
3.1.3
Rear light or brake light
Unscrew and remove the cross-head screw from the rear light. Replace the faulty lamp
(12V, 5/21W).
3.1.4
License plate lighting
Unscrew and remove the cross-head screw from the license plate lighting. Replace the
faulty lamp (12V, 5W).
main panels!
Replace the faulty bulb (12V, 21W).
25
Advertisement
