E-max 90 S Operator's Manual page 11

2.3 Left Switch Unit
2.3.1 High Beam Switch
Position 1:
When the low beam is switched on, pressing the switch down
activates the high beam as long as pressure is applied
•
The blue high beam LED is displayed on the
speedometer while pressure is applied
Position 2:
When the low beam is switched on, pressing the switch up
switches the high beam on permanently
•
The blue high beam LED is displayed in the
speedometer
2.3.2 Indicator switch
Setting indicator:
Turn off indicator:
Sliding the switch to the left or right
switches on the indicators
•
Audible signal
briefly press white button
11