Installation On A Macintosh - Macpower & Tytech M9 – Mini Pod User Manual

If the system
doesn't recognize
the drive, turn on
the power first,
before connecting
the USB/Firewire
cable.
For save removal of
your drive and to
assure that no data
is lost, always
follow the unplug
procedure. If not, an
error message will
show up.

Installation on a Macintosh

Mac OS 9.2 or Mac OS 10.x with a USB connection:
Turn on your computer and start Mac OS
Connect the M9 and turn it on
No driver installation required
The external drive will mount and show up on your desktop**
Mac OS 10.2 or 10.3 with a Firewire and USB 2.0
connection:
Turn on your computer and start Mac OS
Connect the M9 and turn it on
No driver installation required
The external drive will mount and show up on your desktop**
Unplug Procedure:
Drag the external hard drive icon into the trash bin
Turn off your device
** For factory new drives and formatting, see "Partitioning & Formatting"
- 6 -