D-Link DSL-2740U User Manual page 79

Section 3 - Configuration
DSL ROUTER REBOOT
Please ensure you do not turn the Router off while it is
rebooting. After the Router has successfully rebooted, you can
again configure the Router as desired. You can also test the WAN
connection by accessing the Internet with your browser.
Close the DSL Router Configuration window and wait for 1 minute
before reopening your web browser. If necessary, please
reconfigure your computer's IP address to match your new
configuration.
SAVE/RESTORE CONFIGURATION
Click on the Save button to Save Settings to Local Hard Drive. You
will be prompted to select a location on your computer to put the
file. You may name the configuration file anything you like.
Click on the Browse button to browse to the configuration file in the
PC and click on the Update Settings button to load settings from
local hard drive. Confirm that you want to load the file when
prompted and the process will complete automatically. The Router
will reboot and begin operating with the configuration settings that
have just been loaded.
To reset the Router to its factory default settings, click on the
Restore Device button. You will be prompted to confirm your
decision to reset the Router. The Router will reboot with the factory
default settings including IP settings (192.168.1.1) and
Administrator password (admin).
D-Link DSL-2740U User Manual 79