Table of Contents
Advertisement
-
Share media in library with all home media (DLNA) clients: select this
option if you want to share media in the library with all of the home media
clients connected to the network.
-
Share media in library with selected home media (DLNA) clients: if you
only want to share media with certain home media clients, select this
option. Next, select each of the home media clients you want to share the
media with and then click
Note: if a server you want to share is not displayed in either list, ensure it is enabled and
connected to the network. Then click
3. Click the Share Folder tab to set the media folders you want to share on the
network as follows:
Note: these options are available once you select to share media with home media
clients on the Access Control tab.
-
Click
to share additional folders on the network. Just browse to the
location of the folder on your computer and then click Select Folder.
-
To remove a folder from the list, select
4. Click OK to save your changes and share the media with the specified home
media clients.
Note: see "Playing Shared Media" on page 27 for detailed information on playing
media shared on a home network.
Supported File Formats
CyberLink PowerDVD supports the playback of shared media on a network in the
following file formats:
Video: H.264 (MPEG-4), MPEG-2 PS, MPEG-2 TS, WMV.
Photo: BMP, JPG, PNG.
Audio: AAC_ADTS_320 (3GP), AAC_ISO_320 (3GP), LPCM, MP3, WMA.
Playing Shared Media
To play a media file that is on a network (UPnP, DLNA, DTCP-IP) media server, do
this:
to add it to the Allowed list.
to refresh the list of servers.
next to its folder name.
Chapter 2: Using PowerDVD
27
Advertisement
Table of Contents
