Table of Contents
Advertisement
CyberLink PowerDVD
The Power source area displays the current power supply (battery or AC adapter)
that your computer is using. If your power supply is the battery, CyberLink
PowerDVD displays the remaining battery power.
Battery
If your notebook/laptop is running on a battery, use the Battery option to set the
amount of battery power level at which CyberLink PowerDVD will stop playback
automatically. Use the slider to set the percentage (3%-100%).
Power schemes
In the Power schemes section you can select a setting to maximize power usage
and playback performance.
Maximum battery life: select this option to allow for longer play with a slight
•
loss of performance.
Balanced: select this option for an even compromise between quality and
•
performance.
Maximum performance: select this option for the best possible playback, but
•
with a slightly shorter battery life.
LCD brightness
Configure your LCD brightness when playing content on a notebook/laptop that is
running on a battery.
Note: this feature is not available under Windows XP.
Use ambient light sensor to adjust LCD brightness: if your notebook/laptop
•
has an ambient light sensor and is running under Windows 7, select this option
to auto adjust the brightness of the LCD based on the current room lighting.
When enabled, you can select Use TrueTheater lighting to enhance
brightness to enhance the video's brightness to compensate for lowered LCD
brightness when trying to save battery power.
Adjust LCD brightness when using battery: select this option to save battery
•
power by lowering the brightness of your notebook's/laptop's LCD display.
When enabled, you can select Use TrueTheater lighting to enhance
brightness to enhance the video's brightness to compensate for lowered LCD
brightness when trying to save battery power.
Do not adjust LCD brightness: select this option to leave the LCD brightness
•
at the normal brightness.
96
Advertisement
Table of Contents
