Table of Contents
Advertisement
Connector Pin-outs:
Video, RS-232 I/O; Trigger, Audio In
The mating connector: HR25-9P-20PC.
1
CV or Y In
2
Trig 1
3
GND
4
C In
5
GND
6
RS-232 - Txd
7
RS-232 - Gnd
8
RS-232 - Rxd
9
Trig2
10 Ref In
11 Mic In
12 GND
13 L Line In - Audio
14 GND
15 R Line In - Audio
16 Y Out
17 GND
18 C Out
19 GND
20 Composite Out
Compact Flash Installation Procedure
To install the Compact Flash Cards, follow the procedure below:
Be sure to have Power OFF prior to installing or removing Compact Flash parts. Grasp DVR in left hand
with the long metal door on the right side, grip the compact flash door with right hand and slide it toward
you to expose compact flash connector number one, slide door away from you to expose connector
number two. Insert the compact flash card and slide the door to the center (closed) position.
To remove cards, repeat the process above and depress the ejector button located at the extreme front
and rear of the compact flash door access areas.
The Mini DVR Pro use multi-word DMA mode 2 compact flash only.
Mini DVR Pro™ Manual, Fast Forward Video, Inc.
Headphone / Line Audio Output mini-jack...
Standard 2.5mm Stereo connections
Tip
Left HP Output
Ring
Right HP Output
Shank Ground
Power Connector
The mating connector: HR10A-7P-4S.
1
+7 to +25 Vdc - We use +12V.
4
+7 to +25 Vdc - We use +12V.
2
Ground
3
Ground
The two pins closest the power button are GND.
The two pins closest the 26 pin connector are +V.
USB Pin-out is Standard mini-USB.
8
Advertisement
Table of Contents
