UMC M19/36B-GB-TCDI-UK User Manual page 32

19-22_36 technika manual page 32Page 1 7. 8. 2009 8:47:46
Connecting to a PC - Windows XP
5) Left click your mouse on Advance/Advance Settings and left click on Monitor
XP Screen VISTA Screen
6) Left click on the drop down for Screen refresh rate and select 60 Hertz.
7) Click on Apply, then click Yes and the settings will be saved.
8) Now switch off your computer and connect the television (as shown below)
9) Re-start your computer and switch the source to VGA
CONNECTING A LAPTOP
In addition to the above if you are connecting a laptop to the television you will also need to
activate the VGA connection on the laptop.
This can vary based on the brand of laptop you have.
1) Connect the laptop to the television
2) On the Laptop push buttons
Fn + F5
The screen will now switch to the television.
For Windows Vista operating system the process is very similar to the above.
If you require additional support please contact the helpline.
32