Tallysman Wireless Inc. retains an exclusive right to reproduction, manufacture and sale. This document is submitted in confidence, for the use of the recipient alone, or in conjunction with Tallysman Wireless Inc. and its licensees, and for no other purpose whatsoever unless permission for further disclosure is expressly granted in writing.
The TW5210 periodically stores the last know position in non-volatile memory to maintain position information across power cycles. Ordering Information TW5210 with 3 metre cable, NMEA & 1PPS output, RS232 interface, RJ14 connector 32-5210-0 TW5210 with 3 metre cable, NMEA output, USB Connection...
Industrial grade waterproof IP67 enclosure RoHS Compliant 2 TW5210 Evaluation The TW5210 hardware is shipped with a software package, Part # 45-0016-0 which includes the following: TW5210 User manual USB Driver ( for USB version only) ...
The RMC and GGA message can be configured as 3, 4 or 5 digit output, the default is 5 Note 1: If you are using the Visual GPS software utility to display TW5210 outputs, the GSV message should be enabled to view satellite signal strengths.
TW5210 User Manual rev 1_2 Parameter Fields The following configuration parameters can be set and saved: Baud rate: Not applicable for the TW5210 USB version. Leave as default 4800 baud Options: Output on fix instead of UTC second: The TW5210 will immediately output NMEA sentences on acquiring a fix...
Read/Write Select Program/Read to read the parameters in the TW5210 To write a new set of parameters to the TW5210 select Program/Write The configuration file can be save by selecting File/Save Note: Configuration parameters changes do not take effect until the TW5310 is reset i.e.
If you are running Windows 7 or Vista and do not have an internet connection on your PC, DO NOT connect the TW5210 to your PC until after the USB driver is loaded If you are running Windows XP go to section6.1.2 for installation details.
TW5210 User Manual rev 1_2 6.1.1 Windows 7 & Vista Installation If you do not have an internet connection, install the driver provided in the TW5210 Package i.e. stmcdc_twi file to a location on your PC. Goto Control Panel\System and Security\System and Select Device Manager.
TW5210 User Manual rev 1_2 6.1.2 Windows XP Installation Install the driver provided in the TW5210 Package i.e. stmcdc_twi file to a location on your PC. Before connecting the TW5012 to your PC goto the Driver Signing. From the Start menu select Control panel/System/hardware Figure 12 Select “Driver Signing”...
Page 17
TW5210 User Manual rev 1_2 Check the Warn –Prompt me each time to take an action. Select OK. Plug the TW5012 into your computer. Windows XP will prompt you with a “Found new hardware” wizard. Check the “No, not this time” box and then press ‘Next”...
TW5210 User Manual rev 1_2 7 12V RS232 Version Interface The TW5210 RS232 version is terminated in a 4 pin RJ14 connector. The power input is rated for 12V automotive and has overvoltage and transient protection. Figure 23 Wire Color...
The following adaptor cables are available from Tallysman: 7.2.1 DB9 test cable: The 27-0047-0 adaptor cable is required to connect the TW5210 to a PC DB9 port and for configuring the operating parameters. TW5210 DB9 Test Cable Drawing rev 1_0...
TW5210 User Manual rev 1_2 7.2.2 Tait 8000 Series radio: The 27-0048-0 adaptor cable is required to connect the TW5210 to a Tait 8000 series radio. TW5210 Cable Drawing to Tait 8200 Series Radio Rev 1_1 RS232 & CMOS TW5210...
TW5210 User Manual rev 1_2 7.2.3 Kenwood NEXEDGE Radio The 27-0036-1-0 adaptor cable is required to connect the TW5210 to a Kenwood NEXEDGE radio. TW5210 Cable Drawing to NEXEDGE Series Radio Rev 1_0 For RS232 and CMOS TW5210 DB25/M Shell...
TW5210 User Manual rev 1_2 8 NMEA Message Reference NMEA 0183 sentences are all ASCII. Each sentence begins with a dollar sign ($) and ends with a carriage return linefeed (<CR><LF>). Data is comma delimited. A checksum is optionally added.
TW5210 User Manual rev 1_2 cc__fix length of valid characters Spaces are only used in variable text fields. Negative values are indicated by the first character in the field. Please see the full NMEA 0183 Specification for a full description of the message field formats.
TW5210 User Manual rev 1_2 Note: The number of 8.1.2 GGA The GGA message provides Fix Information. $GPGGA,hhmmss.sss,llll.lllll,a,yyyyy.yyyyy,a,x,xx,xx.x,xxx.xx,M,xx.x,M,x.x,xxxx*hh GGA = Global Positioning System Fix Data $GPGGA,204804.000,4520.25363,N,07554.20602,W,0,00,99.0,087.54,M,-34.4,M,,*62 The following fields are listed in the order shown in the comma-separated sentence. 1 = UTC of Position...
TW5210 User Manual rev 1_2 8.1.3 GSA The GSA message provides overall satellite data $GPGSA,a,x,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx.x,xx.x,xx.x*hh GSA = GPS receiver operating mode, SVs used for navigation, and DOP values. $GPGSA,A,1,,,,,,,,,,,,,99.0,99.0,99.0*00 The following fields are listed in the order shown in the comma-separated sentence.
TW5210 User Manual rev 1_2 5 = Elevation in degrees, 90 maximum 6 = Azimuth, degrees from true north, 000 to 359 7 = SNR, 00-99 dB (null when not tracking) 8-11 = Information about second SV, same as field 4-7...