Advertisement
9.
Lower the glove box by removing the right and left
stops.
Lower
completely.
Routing the Subwoofer Harness
10. From the audio unit opening, route the subwoofer
harness to the bottom of the glove box opening.
SUBWOOFER
VEHICLE 20-PIN
20-PIN CONNECTOR
CONNECTOR
Connect.
SUBWOOFER
20-PIN CONNECTOR
SUBWOOFER
2-PIN CONNECTOR
11. Plug the subwoofer harness 20-pin connector into
the vehicle 20-pin connector.
4 of 8
www.collegehillshonda.com
GLOVE BOX
STOPS (2)
VEHICLE
HARNESS
SUBWOOFER
HARNESS
3403170M
12. Get five wire ties with clip from the kit. Using a
utility knife, cut off the clips from the wire ties with
clip at the area shown.
SUBWOOFER
20-PIN CONNECTOR
WIRE TIE
WITH CLIP
13. Secure the subwoofer harness to the vehicle
harness with two cut wire ties with clip.
14. At the bottom of the glove box opening, secure
the subwoofer harness to the vehicle harness with
the remaining three cut wire ties with clip.
FUSE LABEL
(2A)
15. Install the 2A fuse labels to the fuse cases on the
subwoofer harness.
AII 25876 (0308)
WIRE TIES
WITH CLIP
SUBWOOFER
HARNESS
VEHICLE
HARNESS
SUBWOOFER
2-PIN CONNECTOR
Cut off the clip.
FUSE LABEL
(2A)
SUBWOOFER
HARNESS
FUSE
CASES
VEHICLE
HARNESS
CUT WIRE
TIES WITH
CLIP
GLOVE BOX
OPENING
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
3404010M
3404021M
Advertisement
