Innotech Accenda Quick Start Manual

Accenda
Following are highlights for the operation of the Accenda remote control. To take full advantage of the unique Accenda
features, we strongly suggest you take a few minutes to browse through the Accenda User's Guide.
Accenda with the flip-down door open. Major buttons are
highlighted. Please note buttons on the outside of the
flip-down door are functional only when the door is closed.
Battery installation
Quick Start Guide
tm
Before using your Accenda you will need to insert four
new standard size AA rechargeable Nickle-Metal Hydride
(Ni-MH) batteries, then charge the batteries overnight by
placing it on the charging cradle. When the batteries are
charged you can then set it up to send the proper infrared
remote control codes for your entertainment system.
Accenda offers you several methods of set up for your
specific entertainment system. The easiest way is to have
Accenda search through the codes for the specific
manufacturer you specify.
Press
1.
2.
[TV] [VCR]
[CBL/SAT]
[DVD] etc.
3.
[PROG]
4.
st
1
nd
2
5.
6. [SRCH]

Device Set Up

Manually turn on the device that you
want control (TV, VCR, etc.)
Press the device button for the device
you wish to program. The LED inside
the selected button will flash green
once and the other LEDs will glow red.
If sound is enabled, Accenda will
respond with the button name.
Press the [PROG] button (located
inside flip-down door). The LED will
flash green twice. If sound is enabled,
Accenda will respond by saying
"Program."
Type in the 2-digit code for your TV,
digit VCR, etc. manufacturer from the table
9
on the next page. The LED will flash
digit green once for each digit pressed. If
sound is enabled, Accenda will
respond with each number as you
enter it.
Make sure the remote control is aimed
directly at the device you want to
control.
Press [SRCH]. The LED will flash one
time.
Comment