Seeking For Stations In Am Or Fm Mode - DICE Digital AM/FM Reciever Instruction Manual

Seeking for Stations in AM or FM mode

A. Manually Tuning
1. If radio is not in AM or FM mode, press and release Mode button repeatedly to select AM or FM
mode to make sure radio is in AM or FM mode.
2. While in FM mode, turn SEEK knob clockwise to increase 0.2 MHz per step or turn SEEK
knob slowly counterclockwise to decrease 0.2 MHz per step.
3. While in AM mode, turn SEEK knob clockwise to increase 10 kHz per step or turn SEEK knob
counterclockwise slowly to decrease 10 kHz per step.
Frequency announcement will be heard about 2 seconds after the last adjustment.
B. Automatically Seeking
1. While radio is in AM or FM mode:
2. Rotate SEEK knob to hear SEEK announcement and view 'Seeking... SEEK' on the display.
3. When an active station is available, it will automatically stop seeking and announce the station.
4. Once station is announced you may immediately turn knob one click to seek to the next station,
radio will announce SEEK UP or SEEK DOWN depending on clockwise or counterclockwise
rotation.

Note: If no stations are found the radio will announce Channel Not Available. It may be
necessary to relocate your radio or reposition the antenna until a signal is found in your area.
8