Adjusting The Water Level - GE AHG25 Owner's Manual & Installation Instructions

When not using a hose to drain the dehumidifier, make sure the water bucket is in place.
Installing the Water Bucket
Lift the bucket and place it in the dehumidifier,
making sure the slots on both sides of the bucket
are positioned correctly.

Adjusting the Water Level

The dehumidifier has two settings that turn it off
automatically when the bucket is full. This prevents
the danger of overflow.
The bucket must be in the proper position for the
Water Level Control Switch to work.
The Water Level Control Switch will automatically
turn off the dehumidifier at the fill level you have
selected.
Loosen the screw to change position of the
Water Level Spring.
Be careful not to bend or break the spring.
Maximum Fill Position:
Set the Water Level Spring as shown:
Water Level Spring
Loosen to adjust
The dehumidifier will turn off automatically
when the bucket is 3/4 full.
Normal Fill Position:
Set the Water Level Spring as shown:
Water Level Spring
Loosen to adjust
The dehumidifier will turn off automatically
when the bucket is 1/2 full.
Water Level
Control Switch
Water Level
Control Switch
7