Advertisement
in.p3-110™
R 3/16"
4.8 mm
R 15/16"
23.8 mm
R 13/16"
20.6 mm
Step 1
Using the drilling template supplied with the unit, determine the
mounting location and then stick the template on the location.
Once the desired location is established, cut and remove the inside
area on the template.
5 1/8"
130.2 mm
3 1/2"
88.9 mm
UP
8 1/16"
204.8 mm
DOWN
Groove
Step 2
If the installation location is
not perfectly even (e.g. wood
surface), make a silicone
joint between the installation
location and the unit (fi ll the
groove on the back of the unit
with silicone).
Insert unit into the installation
opening.
installation
Step 3
Then drill four 1/8" (3 mm)
mounting holes in the exact
position according to the
drilling template.
Use 4 - # 10 screws of the
appropriate lenght with round,
truss or pan head.
7
Advertisement
