Download Print this page

Placing Ipod On The Dock Station - Aeware in.p3-110 Owner's Manual

Waterproof protection, docking, connectivity & remote control for ipod on a spa

Advertisement

in.p3-110™
The iPod turns on automatically as soon as it's connected to in.p3-
110™ docking connector*. Power to the iPod is turned off when
the iPod is removed from the docking connector. Gecko Alliance's
logo and the note "Ok to disconnect" will be displayed on the
iPod display when it's connected to the docking connector (the
message displayed may vary depending on the model).
* A minimum battery charge level is required. Refer to page 5
for more details.
• Press downwards on
bottom latch to release
the door open.
• Open door compartment.
• Place your iPod inside and
insert it on the docking
connector.
• Close door.

placing iPod on the dock station

Battery charge
The in.p3-110™ unit also acts
as an automatic recharging
docking station for your iPod,
it allows the owner/spa user to
attach the iPod to the charging
station and recharge the
batteries while enjoying the
music.
11

Advertisement

loading