Advertisement
Quick Links
MADELL QK982 SYRUP DISPENSER
OPERATING MANUAL
The QK982 syrup dispenser can be used with different syrups as glues, greases,
solder pastes, etc. Supplied
plastic tips for various applications.
1.Specifications
Dispensing Modes
Automatic and manual with a total of 16
combinations
Dispensing Time
0.01-99.99 seconds adjustable
Timing Intervals
0.1-9.9 seconds adjustable
Repeat Tolerance
±0.05%
Size
23.8X15.0X6.0cm
Weight
1.7Kg
Internal Voltage
24V DC
Air Input
35-100Psi(0.25-0.7MPa)
Air Output
1-100Psi(0.01-0.7Mpa)
2.Operation
(1) Features
1. Power Switch, unit on or off switch.
2. Timing Interval switch, timing intervals control.
3. Air Pressure Regulator, air pressure control.
4. Vacuum Control, "suck back" vacuum control.
5. Air Pressure Gauge, air pressure indicator.
6. Dispense Outlet, quick connect receptacle.
7. Dispensing Sliding Switch,
8. Air-in Tube, compressed air input
9. Footswitch.
10. Model Switch, manual, automatic and other modes selection.
11. Power Connector.
with 10 types of steel tips and 5 types of
syrup output and time interval control
Advertisement
Summary of Contents for Madell QK982
-
Page 1: Specifications
The QK982 syrup dispenser can be used with different syrups as glues, greases, MADELL QK982 SYRUP DISPENSER solder pastes, etc. Supplied with 10 types of steel tips and 5 types of plastic tips for various applications. 1.Specifications OPERATING MANUAL Dispensing Modes... - Page 2 (2).Diagram of front and rear panels Item Mode Switch Status Function VA C U U M AI R P R E SS U R E I N TE R V AL With pedal switch pressed, dispense continuously, otherwise it will D I S PE N SI N G TI M E stop dispensing.
-
Page 3: Operation
(4)Internal air pressure control 3. Helpful hints for making Proper deposit The air pressure regulation knob controls internal air pressure. Air pressure Hold the barrel at approximately 60℃(+ or -20℃) angle(FIG1) at 0.1-2.7bar (1-40Psi) is normally used. Lift the dispenser barrel vertically after making a drop, as shown (FIG2) Do not let the syrup flow back into the controller as shown in FIG3. - Page 4 4. Cautions BR O W N BLUE SW 2 The dispensed syrup maybe toxic and/or hazardous, refer to manufacturer’s W H I TE W H I TE instructions for proper handling and safety precautions. SW 4 Compressed air pressure should not exceed 7 bar (100Psi). Otherwise, it will cause SW 1 negative effects (damage to objects or injury to the user).
-
Page 5: Troubleshooting
5. Trouble shooting 6. Parts list Problem Check or correction Description Unit Quantity Part No. Piston piece 25023 No power 1.Check wall socket for power supply 35cc barrel piece 25024 2.Check fuse. 35cc adapter 47089 3.Unplug from wall. remove top cover ,visually inspect for (+1.0m clean tube) any loose or short connection.