Package Contents; A Few Words On Your New Speakers - Gato Audio FM-2 User Manual

Package contents

Please check that the following is included in the two packages:
• 2 Gato Audio FM-2 speakers
• 2 front grille sets
• This manual - which you should be reading now 

A few words on your new speakers

A good cabinet is the essential foundation of any loudspeaker. The FM-2 cabinet incorporates several noteworthy details. First of all, the
cabinet is made from solid high-density fi berboard, and the rounded sides are laminated with fi ve layers of material to ensure strength,
stiff ness and resonance control. Secondly, the rounded shape itself ensures that stationary waves inside the cabinet never will be a
problem. Thirdly, the solid aluminium profi le does not only give the speaker a unique design; it also has a function: to add mass and by
that dampening resonances and vibration. The cabinet shape will transfer vibration from the front panel to the rear panel. The aluminium
profi le is mounted with a special gasket, providing instant high mass and a totally diff erent resonance structure than the fi berboard.
Excellent drivers are the foundation of true-to-life sound: the drivers' capability to react instantly to the provided signal together with
total control of mechanical resonance is crucial. The drivers in FM-2 are selected from the absolute best drivers available and then
modifi ed further to comply with our demands for technical quality. The midrange reproduction of any speaker is without discussion the
most important thing at all. This is where it all happens. Whether it is the reproduction of vocals, high-hat or drums, all have important
information based in this frequency area. The bass/midrange is specially designed for mid- and high frequency response providing a clean
and dynamic impulse response second to none.
The tweeter is a state-of-the-art ring radiator design that not only yields a useful output far beyond the capability of the human ear,
thereby providing instruments with their natural harmonic structure, but also adds the crucial benefi ts of extremely low distortion and
coloration of the reproduced material.
At the heart of the FM-2 speaker lies an advanced crossover adorned with no less than ultimate quality components: large air-core
coils, low-resonance capacitors and non-inductive resistors mounted on a high-quality fi berglass PCB and cast in a special resonance-
controlling epoxy resin.
Hundreds of hours have been spent designing the network to comply with the drivers' frequency response and impedance, while carefully
considering phase, resonance and impulse response. Finally, we trimmed the sound, not only providing a fl at frequency response but
providing a tantalizingly lifelike sound.
All of the above is draped in a beautiful exterior design, as small as possible and perfectly fi nished in handcrafted veneer or paint.
The supplied magnetic cloth grilles are designed to produce a minimum of coloration and distortion to the sound when mounted. Using
a small and close-fi tting frame clad in sound-transparent fabric ensures that any loss of audio detail is kept at a minimum, and that
diff ractions are well out of the critical midrange area. In addition, it off ers protection for the drivers while enhancing both the beautiful
fi nish and the elegant, simple lines in the design even further.
User Manual
Page 3