ION AIR PRO 3 User Manual page 32

Click the "Install" button to confirm that you want to install the newer firmware
6.
version.
7. Unplug the USB cable from the back of the camera and the camera will
automatically install the latest firmware version. The Green LED illuminates
and flashes to show that the firmware is installing. The process will take
approximately 20 seconds. Do not turn off the camera during the update
process.
8. The Green LED will turn off once the installation of the new firmware is
completed.
9. The camera will turn off when the update is complete. You can power on the
camera and the new firmware will be effective.
1. Place your camera in a stable position during the full firmware update
process
2. Ensure you don't reset or remove the MicroSD card before the full update
process has been completed, the interruption will lead to potential damage to
the camera.
3. Do not power off the camera during the update process, this will lead to
camera damage. Once complete the camera will power down automatically.
4. Any abnormal conditions such as the sudden interruption of the power supply
will cause the camera to potentially be damaged due to the firmware update
interruption.
www.ioncamera.com
32
EN -