STARTING YOUR WIRELESS EXPERIENCE
Install and turn on the Wi-Fi PODZ
Put your Wi-Fi PODZ to the camera PODZ socket.
1.
(follow steps 1 and 2 under section "Installing the
PODZ" on page 17).
2.
Press and hold the Power
your camera
3.
Press the Wi-Fi power button on the Wi-Fi PODZ
to turn on your Wi-Fi. The blue LED lights up to
indicate the Wi-Fi is warming up. It will take around
15-20 seconds for the Wi-Fi to warm up and become connectable. The LED
will flash when the Wi-Fi function is active or connected.
4.
Press Wi-Fi power button to turn off the Wi-Fi anytime.
Wi-Fi will drain your camera battery more rapidly when activated. Turn the
Wi-Fi off if you are not using it to change settings or upload content.
button to turn on
www.ioncamera.com
23
EN -