Assembly - oklahoma joes Longhorn 13201747 Product Manual

ASSEMBLY

1
FIRST, GET A HELPER! This unit is heavy and requires a second person for lifting and moving. NEXT, pick a suitable
location to work. Open the carton and slit the corners so that the carton lays flat. This will give you a protective surface
during assembly. Remove the carton packing material and the parts from inside the firebox and smoke chamber.
2
On each short leg, slide one 12mm flat washer onto axle, followed by a wheel, then another 12mm flat washer. Slide a hitch
pin into the hole at the end of the axle.
12mm Flat Washer
12mm Flat Washer
Wheel
Axle
Short Leg
Hitch Pin
Hitch Pin
Page 9