Salter PT-323 Owner's Manual
  1. Manuals
  2. Brands
  3. Salter Manuals
  4. Elliptical Trainer
  5. PT-323
  6. Owner's manual

Salter PT-323 Owner's Manual

E-line elliptical
Hide thumbs
Table of Contents

Advertisement

Quick Links

OWNER'S
MANUAL
E-LINE ELLIPTICAL
PT-323/N

Advertisement

Table of Contents
loading

Related Manuals for Salter PT-323

Summary of Contents for Salter PT-323

  • Page 1 OWNER’S MANUAL E-LINE ELLIPTICAL PT-323/N...

  • Page 2: Elliptical Trainer

    This is especially important if you are over the age of 35, have never exercised before, are pregnant, or suffer from any illness. OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 3 Upper Handlebar Upright Sleeve Pedal Support Arm Assembly Handlebar Handrail Base Pivoting Arm Cover Rail Cap Main Frame Assembly Cover Front Stabilizer Rear Stabilizer Pedal Assembly Stand OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 4 HARDWARE KIT 79 Lock Washer (M8) 4 pcs 80 Washer (8x16x2.0t) 4 pcs 105 Bolt, Socket Head (M8xp1.25x90mm) 4 pcs Part No. and Description Q’TY HARDWARE KIT OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 5 4 pcs 101 Bolt, Socket Head (M6xp1.0x15mm) 4 pcs 102 Bolt, Socket Head (M6xp1.0x35mm) 4 pcs 104 Bolt, Socket Head (M8xp1.25x55mm) 1 pcs 108 Nut (M6) 4 pcs OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 6 Rear Stabilizer THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY: WRENCH (10 & 17 mm) ALLEN WRENCH (5 & 6 mm) MULTI WRENCH TOOL W/ SCREWDRIVER (13 & 15mm) OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 7 Follow the above STEP b. to attach the Rear Stabilizer (3) to the Main Frame (1) with two Lock Washers (M8)(79), two Washers (8x16x2.0t)(80) and two Bolts, Socket Head (M8xp1.25x90mm)(105) OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 8 Connect the Rear Connection Wire (115C) to the Sensor Wire (119). Be care not to pinch the wires NOTE: After connect the wires, slightly and gently pull two sides of wires to test and make sure whether the wires are fully connected. OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 9 Attach the front end of the Right Pedal Linkage (12) to the Right Telescoping Bar (10) with one Bolt, Button Head (M8xp1.25x90mm)(98) and one Nut (M8)(109). NOTE: Please be sure that Bolt (98) would screw OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 10 Then fully secure four pcs Nuts (M8)(109) that attach to the Upright Post Assembly (4) and Main Frame (1) c. Slide the Upright Sleeve (25) down until it meets the Main Frame (1) OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 11 Telescoping Bar (10). Place the Right Handrail Base Cover (43) at the outer side of the Telescoping Bar (10). Bolt the Handrail Base Cover (42, 43) with two Self-Tapping Screws, Flat Head (M4x16mm)(88). Repeat the above assembly process on the left side OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 12 Washers (8x16x2.0t)(80), five Lock Washers (M8)(79) and four Bolts, Button Head (M8xp1.25x16mm)(97)and one Bolt, Socket Head (M8xp1.25x55mm)(104) NOTE: One Washer (8x16x2.0t)(80), one Lock Washer (M8)(79), one Bolt, Socket Head (M8xp1.25x55mm)(104) will be packed OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 13 Sleeve (30) and the Left Console Sleeve (29) would cover the Upright Cover (55, 56) and the lowest layer of the Console Bottom Cover (28) as the illustration shown on the left side OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 14 Slide the Handlebar Sleeve (37) down to cover the bolts on the Right Handlebar (7) d. Repeat the above assembly process on the left side e. Finish the assembly, make sure that all parts are tightened before you use the equipment OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 15 Connect the Adaptor (117) to the connector located on the front side of the Main Frame (1) b. Plug the Adaptor (117) into an electrical outlet to light up the console OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 16 Main Frame. After finishing all assembly process, place the item on a flat surface. Adjust the Stand (127) until the item sets on the floor without rocking OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 17 Repeat the above process to adjust the stride length on left side NOTE: 1. Always adjust the Right & Left Telescoping Bar (10) in the same height 2. Securely tighten Right & Left Pull Pin (64) before exercising OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 18 Pedaling or pressing any keys to active the console. The console display will then light up with a short beep sound, indicating the console will be ready for use ower The console would automatically shut off after 4 minutes of inactivity rogram OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 19 LEVEL in each time interval) Press to increase the values of the program function (PROGRAM, TIME, HEIGHT, WEIGHT, DISTANCE, CALORIES, AGE, GENDER, TARGET H.R. and TORQUE/RESISTANCE LEVEL in each time interval) OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 20 Stop exercising before starting the function. d. Your pulse will be displayed approximately few seconds after the heart symbol “ ” is displayed NOTE: OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 21  The function of ODO and DISTANCE are similar will accumulate the total distance traveled by the item during workout DIFFERENT RESET INFO. of DISTANCE & ODO: OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 22 If you do not place your hands correctly and a few seconds passes without a pulse input, the console will turn off the pulse circuit. Place your hands back on the Pulse Sensors correctly, the pulse readout will appear again OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 23 ENTER pressing button to confirm and MANUAL PROGRAM (P1) MANUAL PROGRAM (P1) enter c. ENTER button: ENTER Press button to confirm and enter MANUAL PROGRAM (P1) OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 24 0:00 to 999 km/mile  Count Down: If you have set the target distance, the console will count down from the selected target time down to 0 OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 25 The console will then display an error message “P”. Place your hands back on the Pulse Sensors correctly, the pulse readout will appear again OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 26 If there is any necessary to reset ODO’s distance value, press DOWN ENTER at the same time to let the motor automatically calibrate to reset ODO value to zero OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 27 START/PAUSE Continue pressing a few seconds, all the date will reset to the initial value and the console will return to POWER ON status POWER ON status OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 28 0:00 to 999 km/mile  Count Down: If you have set the target distance, the console will count down from the selected target time down to 0 OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 29 The console will then display an error message “P”. Place your hands back on the Pulse Sensors correctly, the pulse readout will appear again OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 30 If there is any necessary to reset ODO’s distance value, press DOWN ENTER at the same time to let the motor automatically calibrate to reset ODO value to zero OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 31 UP or DOWN button: BODY FAT PROGRAM (P8) UP or DOWN Press button to select ENTER button: BODY FAT PROGRAM (P8) ENTER Press button to confirm and enter OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 32 Press to start testing your body fat. The testing time takes about 10 seconds, please review the next page to understand the meaning of the result OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 33 You body fat percentage is simply the percentage of fat your body contains. If you are 150 pounds and 10% fat, it means that your body consists of 15 pounds fat and 135 pounds lean body mass, such as bone, muscle, organ tissue, blood and everything else. OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 34 Sensors won’t be able pick up the signals. The console would then display an error message “E3”. To test it again, be sure to place your hands back on the Pulse Sensors correctly OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 35 H.R.C. PROGRAM (P9 ~ P12) UP or DOWN Press button to select ENTER button: H.R.C. PROGRAM (P9 ~ P12) ENTER Press button to confirm and enter OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 36 Count Up: If target calories was not selected, this would measure total calories burned during exercise  Count Down: If you have set the preference value of calories, the console will count down from that selected value down to 0 OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 37 TARGET HEART RATE ZONE in this example is 109 to 119. The program will monitor your pulse and adjust the torque/resistance level automatically to keep your pulse within the HEART RATE ZONE (109 – 119) during workout OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 38 SPEED, DISTANCE and CALORIES, or RPM, ODO (Odometer) and WATT RPM, ODO, WATT will show at the same time SPEED, DISTANCE, CAL. will show at the same time OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 39 POWER ON status POWER ON status “3” Normal way to operate USER MODE PROGRAM (P13~P16) OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 40 0 “C. SET THE DESIRED CALORIES and YOUR AGE” ENTER UP or DOWN button and then button: OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 41 You can modify the profile anytime under the STOP mode “F. START EXERCISE” START/ PAUSE START/ PAUSE button: Press to begin exercise. “START” would then appear to the screen OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 42 J. DURING WORKOUT, HOW TO REVIEW SPEED, DISTANCE, CALORIES, RPM, ODO (ODOMETER) AND WATT” START/PAUSE MODE During workout (after pressing ), the user could press to select SPEED, DISTANCE and CALORIES, or RPM, ODO (Odometer) and WATT OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 43 If there is any necessary to reset ODO’s distance value, press DOWN ENTER at the same time to let the motor automatically calibrate to reset ODO value to zero OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 44 The LCD plugged in (item Screen does power supply from not display Adaptor) anything The Computer is Replace the Computer faulty OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 45 Circuit Board firm, STOP tightening screws when you meet a slight angle and resistance NOT inline or parallel with the Console Cover The Computer is Replace the Computer faulty OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 46 Take a six-second heartbeat count and multiply the results by 10 to find your heart rate. For example, if your six-second heartbeat count is 14, your heart rate OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 47 A proper cool-down lowers your heart rate and allows blood to return to the heart. Your cool-down should include the stretches listed above and should be completed after each strength-training session. OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 48 “P RODUCT ARTS RAWING (A)” OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 49 “P RODUCT ARTS RAWING (B)” OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 50 Console Bottom Cover Left Crank Left Console Sleeve Right Crank Right Console Sleeve Axle for Crank Foam Grip for Front Small Handlebar Flywheel Hand Pulse Upper Cover OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 51 Self-Tapping Screw, Flat Head (M4x16mm) 121 Rear Pulse Sensor Wire Self-Tapping Screw, Flat Head 122 Washer (10x28x2.0t) (M5x18mm) Flat-head inner hexagon screw Screw, Pan Head (M5xp0.8x25mm) (M8xp1.25x33mm) OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...
  • Page 52 Self-Tapping Screw, Flat Head 130 Middle Handlebar Connection Plug (M4x10mm) 131 Pivoting Arm Connection Plug 127 Stand 129 Bolt (M4x12mm) OWNER’S MANUAL V.1 ENGLISH PT-323/N E-LINE ELLIPTICAL This manual is available at www.salter.es...

This manual is also suitable for:

Pt-323n

Table of Contents