sunjoe TRJ600C Operator's Manual

A Division of Snow Joe, LLC
IMPORTANT!

Safety Instructions

All Operators Must Read These
Instructions Before Use

General Power Tool Safety Warnings

m
WARNING
Read all safety warnings and all
instructions
Failure to follow all warnings and
instructions may result in electric shock, fire or serious injury.
Save all warnings and instructions for
future reference
Work Area
• Keep work areas clean and well lit. Cluttered and dark areas
invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Personal safety
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
• Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
• Avoid accidental starting. Ensure the switch is in the off-
position before plugging in. Carrying power tools with your
finger on the switch or plugging in power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before turning the
tool ON. A wrench or a key that is left attached to a rotating
part of the power tool may result in personal injury.
© 2010 by Snow Joe, LLC
All rights reserved. Original instructions.
Lithium-ion 2-IN-1 Cordless Trimmer/Edger
Lithium-ion 2-IN-1 Cordless Trimmer/Edger
Model No. TRJ600C
1
• Ensure you always have proper footing and balance.
This will provide better control of the power tool in
unexpected situations.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities ensure that these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
Power Tool Use and Care
• Do not use the power tool for applications that are
beyond it's capacity. Use the correct power tool for your
application. The correct power tool will do the job better
and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it
ON and OFF. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
• Disconnect the battery from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
• Store the tool out of the reach of children. Do not allow
people unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the
hands of untrained users.
• Always maintain the power tool. Check for misalignment
or binding of moving parts, breakage of parts, or other
conditions that would affect it's operation. If damaged, have
the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained
cutting attachments with sharp cutting edges are less likely
to bind and are easier to control.
• Only use the tool, accessories, and attachments as
described in these instructions. Using the tool for
operations it is not intended for could cause damage to the
tool and hazardous situations. Always consider the working
conditions and the work to be performed.
Service
• Have the power tool serviced by a qualified repair personnel
using only manufacturer's recommended replacement
parts. This will ensure that the safety of the power tool is
maintained.
SAVE THESE INSTRUCTIONS
Form No. SJ-TRJ600C-880E
OPERATOR'S MANUAL