EnGenius Wireless Outdoor Access Point & Client Bridge User Manual page 10

Long Range Wireless Access Point / Client Bridge
2. Select Internet Protocol (TCP/IP) and then click on the Properties button. This will
allow you to configure the TCP/IP settings of your PC/Notebook.
3. Select Use the following IP Address radio button and then enter the IP address
and subnet mask. Ensure that the IP address and subnet mask are on the same
subnet as the device.
For Example:
4. Click on the OK button to close this window, and once again to close LAN properties
window.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
PC IP address: 192.168.1.10
PC subnet mask: 255.255.255.0
Version 1.0
10