Manual Start Up - rec tec grill RT-680 Owner's Manual

Manual Start Up:

In case of ignitor failure, you can start your Rec Tec Grill manually:
1. Remove the stainless steel Grates, Drip Pan, and Flame Deflector.
2. Inspect the stainless steel burn pot to ensure that is clean of debris, ash and that the Ignitor Rod
is not obstructed.
3. Place a small handful of pellets in the bottom of the Fire Pot. Add a small amount of solid fuel
fire starter, such as those made from sawdust and wax or use wood shavings. (A paper towel or
shredded newspaper can work as a substitute.)
CAUTION: DO NOT USE FLAMMABLE LIQUIDS SUCH AS GASOLINE,
GASOLINE-TYPE LANTERN FUEL, KEROSENE, CHARCOAL LIGHTER FLUID,
OR SIMILAR LIQUIDS TO START OR FRESHEN-UP THE FIRE! KEEP ALL SUCH
LIQUIDS WELL AWAY FROM THE GRILL WHILE IT IS IN USE.
4. Light the fire starter.
5. After the pellets are burning briskly, turn on your grill. If your fire goes out, repeat steps 1-4 above.
6. If your fire stays lit, replace the stainless steel Flame Deflector, Drip Pan and cooking grates and
close the lid.
Questions?
Call our customer service at 1-855-696-0890
10am-8pm EST, M-F. Or visit RecTecGrills.com.
15
©2014, Rec Tec Industries, LLC