rec tec grill RT-680 Owner's Manual page 16

3
Temperature Display Screen
Displays temperature readouts (either Actual or Set Point) error messages, and power up readout.
LED Messages:
rEC, GrLL, 5.10
These three screens will display when the appliance is plugged into a GFI
electrical outlet. This describes the make and model of the Smart Grill
Technology™ processor. (The 5.10 in this example identifies the software
revision – your grill may indicate a different version of software.)
350F
This is the default temperature at start up. The temperature setting range is from
180ºF to 500ºF while the actual temperature readout ranges from ambient to 500ºF.
ER-1
This error code is to indicate the appliance has overheated.
ER-2
This error code indicates a failure to ignite.
ER-3
This error code indicates a power failure causing the grill to cool.
COOL
Displays after turning the grill off, during cool-down.
Note: To reset an error, press ON or OFF after correcting the problem.
4
Temperature Display Toggle
This button toggles the LED temperature display between Actual and Set Point. (See 5)
5
Display Indicator Light
The LED beside Actual or Set-Point is used to indicate which temperature is presently displayed.
Actual: Current Temperature Inside Your Rec Tec
Set Point: The temperature setting you input.
6
Pellet Primer Touch Pad
When the Pellet Prime touch pad is pressed and held, the fuel feed system will turn and feed more
wood pellets to the fire pot. This should only be used to fill an empty auger tube after the grill has
completely run out of pellets and has been refilled.
7
Grill Light Switch
Turns light inside the hood on (|) or off (O).
14
©2014, Rec Tec Industries, LLC