TeachLogic Titan Owner's Manual page 13

DR-750 Receiver for Wireless Microphone
One or Two receiver modules can be installed in the Titan. Each receiver has 96
selectable channels to assure interference-free operation and is equipped with
a diversity antenna for added sensitivity.
LCD Display: Ch. # or Freq. Readout
1
RF Reception: Diversity A/B Antenna
2
Transmission Signal Present Indicator
3
(Yellow)
Flash-Audio Level Being Received
4
Operation
Turn receiver "on", turning volume/power switch clockwise.
1.
The LCD screen will display "ON" then revert to factory default channel or
2.
the channel last selected.
To select or change channel, press the "SET" button. LCD display will start
3.
flashing.
Using the UP/DOWN arrow buttons set the receiver to desired channel or
4.
match transmitter channel.
Press "SET" button and to lock in the channel selected.
5.
Adjust volume to desired level.
6.
Module is now ready to receive signal from a wireless microphone or AirLink
7.
transmitter.
When receiving a transmission signal, the A/B diversity antenna LED will
8.
illuminate "Red/Green"
RX indicator will illuminate "Yellow", indicating receipt of signal from trans-
9.
mitter.
AF indicator will flash "Green" when receiving an audio signal.
10.
TITAN COMPONENTS & OPERATION
1 6
2 3 4 5
Channel Set: Lock/Unlock
5
Channel "Up/Down" Selector
6
Receiver Module: "on/off"
7
and Master Gain
Owner's Manual
7
13