Audio; Date & Time; Reset All; System Information - PrimeDTV Technologies PHD-8VX Owner's Manual

Full hd 1080p hdmi a/v switcher digital hdtv tuner receiver media box
Table of Contents

Advertisement

Date & Time
Use this feature to adjust time zone setting and etc.

Reset All

With one fell swoop you can reset all settings back to
factory settings. This includes the channel map, all
Program Info, Favorite channel lists, etc. The TV
should display the Setup Wizard following reset, just
as if it was turned on out-of-the-box.
If a PIN is set, the PIN entry dialog is displayed
before the Reset All Settings dialog box, even if
Locks are temporarily off. If no PIN is set, the
dialog is displayed immediately.

System Information

Display important system information.
The information is including:
Channel Info
Audio/Video Stream Info
Video Output Info
Miscellaneous Info

Audio

Digital Audio
Highlight "Audio" option on MENU to adjust audio
1.
Dolby
settings. Press OK or ►.
Press OK or ► into "Bass, Treble & Balance".
2.
Press EXIT to exit.
3.
Bass, Treble & Balance
Use this option to adjust output audio bass, treble
and balance. Press OK or ► into each section.
Press OK again to highlight the section. Use
adjust values.

Level Set

In certain situation, you may want to set general
audio level higher or lower by set this option on or
off.

SPDIF Output

You can output digital audio to home theater or
similar device whose DIGITAL AUDIO INPUT
terminal is connected to the DOLBY DIGITAL OUT
(OPTICAL) terminal on PHD-8VX. Please select an
audio of the program you are watching and the
equipment connected.
You can change the optical output to Dolby AC3 or
PCM.
Item
PCM
The
coaxial
terminal outputs audio signal in PCM
form. If your digital audio system does
not support Dolby Digital, select "PCM"
Dolby
The optical digital audio output terminal
Digital
outputs audio signal in Dolby AC3
(AC3)
form.
It
surround program of digital.

Analog Preference

Select analog channel audio output to one of the
options. Default is Stereo.
Mono
Stereo
SAP

Digital Preference

In digital channel audio output, if available, user can
select either one of the options. Default is English.
English
French
Spanish
/
Description
digital

audio

output
reproduces
sound
from
to
23

Advertisement

Table of Contents
loading

Table of Contents