Table of Contents
Advertisement
Operation
This chapter covers all of the necessary features in order to operate PHD-8VX, Full HD 1080p HDMI A/V
Switcher Digital HDTV Tuner Receiver Media Box. It includes watching TV and using menu.
Watching TV
This paragraph explains simple operations for
watching a TV program. It includes:
Turning on or off the PHD-8VX
Changing the channels
Adjust volume
Using the MUTE
Setting the Sleep Timer
Seeing the Closed Caption
Displaying the channel information
Displaying the GUIDE (EPG)
Audio Preference
Turning on or off PHD-8VX tuner
Preparation
Perform the following steps before you turning on the
PHD-8VX Digital HDTV Tuner.
Insert the batteries into the remote control unit.
1.
(See page 11)
Connect the antenna/cable signal to the PHD-8VX.
2.
(See page 12)
Plug in the AC cord to the AC outlet.
3.
Turning on the power
Press the POWER switch on the front panel.
1.
Press the STANDBY button on the front panel or
2.
press the POWER button on the remote control to
start initial unit booting up.
Power indicator
ON
OFF/Standby
Turning off the power
Press the STANDBY button on the front panel or
1.
POWER on the remote control.
If you are not going to use this PHD-8VX for a long
2.
period of time, you can press the POWER switch
on the front panel to switch off unit power
completely.
16
Lighting(Green)
Lighting(Red)
Changing the channels
You can change channels in several ways.
Method 1
Press CH+/CH- button on the remote control or
CH+/UP, CH-/DOWN button on the front panel to
change the channels.
The channel number and name are displaying
on the screen
Method 2
Using remote control buttons 0-9, and · (DOT) to
select a channel program.
e.g., for analog channel 8:
Press 8 → OK or Press 8 → · →0 → OK
e.g., for digital channel 15.1:
Press 1 → 5 → · →1 → OK
Method 3
Press GOTO on remote control to switch to the
1.
previously tuned channel.
Press GOTO again to switch back to the currently
2.
tuned channel.
GOTO will not work if no channel has been
Advertisement
Chapters
Table of Contents
