AMX ViewStat ENV-VST-C User Manual page 47

10. Use the navigation buttons to highlight More, and press Mode/Select to access the second
Thermostat Setup screen (see FIG. 36).
FIG. 36 Thermostat Setup screen (2 of 2)
11. With Balance Point highlighted, press Mode/Select to activate it.
12. Press Mode/Select to indicate the balance point.
13. Use the navigation buttons to highlight Exit, and press Mode/Select to return to the second
Advanced Setup screen.
The Balance Point option is only available if your thermostat is configured to operate as a heat
pump.
ViewStat Color Communicating Thermostat User Guide
Operating the Thermostat
43