Installation; Air Filter Cleaning; Care And Maintenance - Condura ROOM AIR CONDITIONER Owner's Manual

AIR CONDITIONING INSTALLATION
Location
Avoid installing the air conditioner where it is
exposed to direct sunlight.
The air conditioner should be installed with a
strong external support to minimize noise and
vibration and for the purpose of safe installation,
repair, replacement and secure positioning.
AWNING
BRACKET
100mm
Note: Unit may be supported by a solid frame
from below or by a hanger from a solid
overhead support.
Dimension (Clearances)
Prepare an installation hole slightly bigger
than the outer wrapper size.
H
W

CARE AND MAINTENANCE

Clean your air conditioner occasionally to keep it
looking new. Be sure to unplug the unit before
cleaning to prevent shock or fire hazards.

Air Filter Cleaning

If the air filter becomes clogged with dust, smooth
air flow is obstructed and cooling efficiency
becomes low.
Unscrew the front grille on both sides. Pull the filter
out of the unit.
Wash the filter using liquid dishwashing detergent
and warm water. Rinse filter thoroughly.
Gently shake excess water from the filter. Be sure
the filter is thoroughly dry before replacing.
About 10mm
H = 314mm
W = 412mm
Installations of the unit into the wall
AIR IN
AIR OUT
AIR IN
100mm minimum
45° BRICK CUT AWAY
TO CLEAR LOUVERS
FRONT
BRICK
WALL
100mm
AIR IN
LOUVER
AIR OUT
Fix the unit with bracket and secure it with screws
Bracket
AIR IN
45° BRICK CUT AWAY
TO CLEAR LOUVERS
BRICK
WALL
AIR IN
100mm