Time Timer Watch Plus Quick Manual

"the difference is the disk"
Introduction
Congratulations on your purchase of the Time Timer
Watch Plus™! No other tool communicates the concept
of elapsed time as well as the Time Timer. Time Timer
reinforces the sense of elapsed time with a graphic
depiction of the time remaining.
For years, Time Timer desktop timers have been used
effectively to help teachers, business people, and students
of all ability levels manage their time more effectively.
With the new Time Timer Watch Plus, you can have more
flexibility and portability in time management than ever
before.
Understanding the Watch
The Time Timer Watch Plus has two modes of operation
– Timer and Time of Day. To change between modes, press
the MODE button (lower left).
The Timer mode provides a graphical count down timer,
using the patented Time Timer technology. A red disk
surrounds digits – both represent the time remaining.
The disk and digital display both diminish as time elapses
until no red is visible on the timer face, and the digits read
"0:00" . Time elapses in a clockwise direction. When active,
the Pre-Alarm and Alarm sound to let you know that time
is running out or has expired.
TIME TIMER
TIME TIMER
0
0
30M
30M
WATER RESIST
WATER RESIST
59 minutes 45 minutes
remaining remaining
Time of Day uses a traditional "analog" watch face to
show the current time, along with a digital display of time.
The watch also includes a Time of Day Alarm.
The watch also comes with a convenient back light, to
help you see the display in low light conditions. Press the
LIGHT button (upper left) to turn on the back light.
Watch Plus
™
TIME TIMER
0
30M
WATER RESIST
TIME TIMER
TIME TIMER
TIME TIMER
0 0
0
30M 30M
30M
WATER RESIST WATER RESIST
WATER RESIST
Time's up
Back light
and Setting
TIME TIMER
0
Change
30M
WATER RESIST
Modes

Using the Timer

Press the MODE button (lower
left) until you see the Time
Timer's red dial.
TIME TIMER
The timer can be set any-
0
where from one minute up
to 12 hours. There is both an
audible alarm and also a pre-
alarm to let you know when
time is running out or has
expired.
The watch comes from the
30M
WATER RESIST
factory with the timer set to
one hour (indicated by 1:00
in the middle of display), and
the audible alarms set to OFF .
To change the settings, see instructions below.
• To Start the timer, press the TIMER button (upper right).
• To Stop or Restart the timer, press the TIMER button TWICE,
in rapid succession (press the button twice within ½ second).
• To Reset the timer, press and hold the TIMER button for at
least 2 seconds.
If turned ON, the Alarm will sound when time expires. The alarm
sounds for 5 seconds, or until cancelled by pressing any button.
If turned ON, the Pre-Alarm will sound according to the schedule
shown below (note that Pre-Alarm can be used only if Alarm is
TIME TIMER
TIME TIMER
TIME TIMER
also being used).
0
0
0
AM
AM
30M
30M
WATER RESIST
30M
WATER RESIST
WATER RESIST
Suggested Applications
In the workplace, Time Timers can be used to:
• Time seminars, meetings, panel discussions and presentations
• Quantify time left before appointments and deadlines
• Monitor break time
• Manage progress toward goals and agenda items
• Oversee skills tests
• Regulate study time, computer time and play time
• Measure "time out"
TIME TIMER
0
30M
WATER RESIST
TIME TIMER
WATER RESIST
TIME TIMER
0
Table of Pre-Alarm vs Time Setting
Time Set Pre-Alarm at last:
< 3 min 10 sec
3 - 10 min 30M 30 sec
WATER RESIST
10 - 30 min 2 min
> 30 min 5 min
TIME TIMER
0
Start,
Stop, &
Reset
Timer
30M
WATER RESIST
Press
Once to
Start and
Twice
quickly
0
to Stop.
Press
and
Hold
to
Reset.
30M
TIME TIMER
0
AM
30M
WATER RESIST
#998-310