Table of Contents
Advertisement
QuickSpecs
Supported Products
Compatibility
HP ProLiant Servers
ProLiant BL c-Class
Server Blade
Enclosures
Supported Configurations
1. Upper Fan System
2. Interconnect Bays 1 /2
3. Interconnect Bays 3 / 4
4. Interconnect Bays 5 / 6
All HP ProLiant BladeSystem c-Class Server Blades with latest ROM updates
Supports all Server NIC's including LOM and Mezzanine card options
Virtual Connect requires the following minimum firmware levels:
BL460c BIOS - System ROM version 2007.05.01 or later
BL480c BIOS-System ROM version 2007.05.01 or later
BL465c BIOS - System ROM version 2007.04.05 or later
BL685c BIOS - System ROM version 2007.04.05 or later
Server Mezzanine Cards:
QLogic QMH2462 4Gb FC HBA QLogic Firmware loaded when driver is loaded. Use QLogic
BIOS version 1.26 (in Multiboot 1.63) or later
HP Emulex LPe 1105-HP 4Gb FC BIOS version 6.00a2 (3.00a4) or later
For the latest additional information on required firmware versions and to download firmware
upgrades, see the HP website http://www.hp.com/go/bladesystemupdates.
The HP BladeSystem c3000 and c7000 Enclosures have been designed up front with the Virtual
Connect Architecture in mind incorporating the HP Onboard Administrator, ILO Management, and
HP Management tools inside the Virtual Connect framework.
Virtual Connect requires the following minimum firmware levels:
Single and redundant Onboard Administrators - (version 2.01 or later)
HP BladeSystem c7000 Enclosure - Rear View
DA - 12673
Worldwide QuickSpecs — Version 5 — 10-1-2007
HP 4Gb Virtual Connect Fibre Channel Module for c-
5. Interconnect Bays 7 / 8
6. On Board Administrator
7. Lower Fan System
8. Rear Redundant Power Complex
Class BladeSystem
Page 3
Advertisement
Table of Contents
