Detaching The Monitor Stand; Wall Mounting (Optional) - Lenovo ThinkVision LT1712p User Manual

Detaching the monitor stand

Gently squeeze both ends of the cylinder and remove in the direction shown. This
allows access to the screws that attach the stand to the monitor

Wall Mounting (Optional)

Refer to the instructions that come with the VESA compatible base mounting kit.
1. Place the monitor face down on a non-abrasive surface on stable flat table.
2. Remove the stand.
3. Attach the mounting bracket from the wall mounting kit to the monitor.
4. Mount the monitor on the wall by following the instructions that come with the
NOTE: For use only with UL(expand UL) Listed Wall Mount Bracket with minimum
2-9
LT1712p Flat Panel Monitor User's Guide
base mounting kit.
weight/load bearing capacity of 3.5 kg.