Audio Description - Panasonic Viera TH-L32B6A Operating Instructions Manual

[Reset Picture Defaults]
Resets the current picture settings to defaults.
Sound
[Mode]
Sets your favourite sound mode [Standard] / [Music] /
[Speech] / [User]
●
The selected mode affects all input signals.
[Standard]  : Standard sound mode
[Music]  : Improves sound quality for watching music
videos, etc.
[Speech]  : Improves sound quality for watching news,
drama, etc.
 I n Standard, Music and Speech modes, you can
adjust the [Bass] and [Treble] settings, and those
settings will be stored for each mode.
[User]: Adjusts the sounds manually by using the
equaliser
– When you select [User] mode, [Equaliser] is active
instead of [Bass] and [Treble]. Select [Equaliser] and
adjust the frequency.
[Bass], [Treble]
Adjusts the bass / treble level respectively
[Equaliser]
Adjusts the frequency level to suit your favourite sound
quality
●
This function is available when [Mode] is set to [User].
●
Select the frequency and change the frequency level
by using the cursor buttons.
●
To enhance the bass sound, raise the level of the lower
frequency. To enhance the treble sound, raise the level
of the higher frequency.
●
To reset the levels of each frequency to the default
settings, select [Reset Equaliser Settings] by using the
cursor button, and then press the OK button.
[Balance]
Adjusts volume level of right and left speakers
[Surround]
Surround sound settings [On] / [Off]
[Auto Gain Control]
Automatically regulates large sound level differences
between channels and inputs [On] / [Off]
[Volume Correction]
Adjusts the volume of individual channel or input mode
[Speaker Distance to Wall]
Compensates for the low frequency sound due to the
distance between the speakers and the wall
[Up to 30cm] / [Over 30cm]
●
If the distance between the TV and wall is over 30 cm,
[Over 30cm] is recommended.
●
If the distance between the TV and wall is within
30 cm, [Up to 30cm] is recommended.
[MPX]
Selects multiplex sound mode (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
●
For Analogue TV
14
B6AZ.indd 14 B6AZ.indd 14
(below)
[Digital Audio Preference]
Selects the initial setting for audio tracks
[Dolby D] / [MPEG]
[Dolby D] / [HE-AAC]
[Dolby D]: The priority is given to Dolby Digital.
[MPEG]: The priority is given to MPEG.
[HE-AAC]: The priority is given to HE-AAC.
●
Dolby Digital is the method of coding digital signals
developed by Dolby Laboratories. Apart from stereo
(2ch) audio, these signals can be multi-channel audio.
●
MPEG is an audio compression method that
compresses audio to the smaller size without any
considerable loss of audio quality.
●
HE-AAC is a perceptual coding method used to
compress digital audio for efficient storage and
transmission.
●
For Digital TV only
[SPDIF Selection]
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal
from DIGITAL AUDIO OUT and HDMI 2 (ARC function)
terminals [Auto] / [PCM]
[Auto]: Dolby Digital and HE-AAC multi-channel are
output as Dolby Digital Bitstream. MPEG is output as
PCM.
[PCM]: Digital output signal is fixed to PCM.
●
For Digital TV or video contents of Media Player

[Audio Description]

Narration settings for visually impaired users
■
[Audio Description]
Set to [Auto] to activate the narration sound track when
available on the broadcast [Off] / [Auto]
■
[Volume]
Adjusts the volume of the narration sound track
■
[Speakers]
Set to [On] to activate the narration sound track from
the TV speakers [Off] / [On]
[HDMI1 / 2 Input]
Selects to fit the input signal [Digital] / [Analogue]
(p. 20)
[Digital]: When sound is carried via the HDMI cable
connection
[Analogue]: When sound is not carried via the HDMI-
DVI adaptor cable connection
●
For HDMI input
[Reset Sound Defaults]
Resets the current sound settings to defaults.
Timer
[Off Timer]
Sets the duration until the TV automatically goes to
Standby mode [Off] / [15] / [30] / [45] / [60] / [75] / [90]
(minutes)
[Daylight Saving Time]
Selects the time offset from the standard time for
Summer [+1 hour] / [+1/2 hour] / [Off] / [Auto]
S
ti
[S
T
E
p
E
1
S
●
■
■
■
■
■
■
■
■
2/1/2013 3:51:11 PM 2/1/2013 3:51:11 PM