Service Osd - LG Flatron W2234S Service Manual

1) Press MENU Key and Power Key, Monitor Will Enter Service OSD.
2) The SVC OSD menu contains additional menus that the User OSD menu as described below.
a) CLEAR ETI : To initialize using time.
b) Auto Color : W/B balance and Automatically sets the gain and offset value.
c) AGING : Select Aging mode(on/off).
d) MODULE : Show Current module Type
e) LG LOGO: ON
f) DFC: ON OFF. (Yes or No to apply the operation of DFC function.)
g) NVRAM INIT : EEPROM initialize.(24C04)
h) R/G/B-9300K : Allows you to set the R/G/B-9300K value manually.
i) R/G/B-6500K : Allows you to set the R/G/B-6500K value manually.
j) R/G/B-Offset : Allows you to set the R/G/B-Offset value manually.(Analog Only)
k) R/G/B-Gain : Allows you to set the R/G/B-Gain value manually.(Analog Only)
l) RS232: Enable/Disable Debug Mode(on/off)
m) sRGB: Allows you to set the sRGB value manually
Insert to
Parallel Port
on PC

SERVICE OSD

OFF. (Yes or No to display the Splash OSD in AC/DC power On time.)
ISP Board
Figure 1.Cable Connection For ISP
14
LCD
Monitor D-
Sub