Automatic Time Limit; Wipe Protection; Energy Consumption Display; Basic Settings - Bosch PKB6..F17 Series Instruction Manual

Automatic time limit

If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating.
indicator flash alternately on the hotplate display.

Wipe protection

If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a control panel
pause function. Touch the
the display light above the

Energy consumption display

You can use this function to have the total energy consumption
between switching the hob on and off displayed.
Once switched off, the energy consumption in kilowatt hours
(e.g. 1.08 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other things, on
the voltage quality of the power supply.

Basic settings

Your appliance has various basic settings. You can adapt these
settings to your needs.
Display Function
Automatic childproof lock
™‚
Switched off.*
‹
‚ Switched on.
Audible signal
™ƒ
‹ Confirmation signal and operation error signal are switched off.
Only the operation error signal is switched on.
‚
ƒ Only the confirmation signal is switched on.
Confirmation signal and operation error signal switched on.*
„
Energy consumption display(Ask your electricity supply company what the mains voltage is)
™„
Consumption display switched off.*
‹
‚ Consumption display with mains voltage at 230 V.
Consumption display with mains voltage at 400 V.
ƒ
„ Consumption display with mains voltage at 220 V.
Consumption display with mains voltage at 240 V.
...
* Basic setting
10
and the / residual heat
" ‰ • œ
symbol. A signal sounds and
- D
symbol lights up. The control
- D
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
panel is locked for 30 seconds. You can now wipe over the
control panel without altering any settings.
Note: The main switch is excluded from the control panel
pause function. You can switch off the hob at any time.
The display has not been activated. You can find out how to
activate the display in the Basic settings section.