Operations; Before Use; Playback; Turning The Power Off - Denon PMA-720AE Owner's Manual

Operations

Before use

1
Turn the VOLUME on the main unit all the way down.
2
Set SOURCE DIRECT on the main unit to "
3
BASS TREBLE BALANCE
Set , and
to the center positions.
4
X
Press on the main unit.
The power indicator blinks red for several seconds, then lights
green.

Turning the power off

1
AMP POWER X
Press .
The power is set to the standby mode.
2
X
Press on the main unit.
The power indicator turns off, and so does the power.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods
of time or when going on vacation, either press
turn off the power, or unplug the power cord from the power outlet.
Starting playback
1
Press the input source select
CD
button ( ,
NETWORK ,
j OFF".
TUNER
) to be played back.
• The desired input source can be
on the main unit selected directly.
• The input indicator on the main unit for
the selected source lights.
2
Play the selected source.
3
Adjust VOLUME df
desired level.
4
Adjust the tone with
on the main unit.
VOLUME
• When on the main unit is turned just past the "12
o'clock" position (over halfway), the effect of
on the main unit adjustments decreases.
VOLUME
• When on the main unit is turned to maximum or all the
way clockwise, the bases and treble can no longer be adjusted.
5
If there is no need to adjust the tone, press
DIRECT on the main unit.
• When switched "hON", the signal does not pass through the
tone adjustment circuitry (bass, treble and balance), resulting in
X
on the main unit to
playback of a higher sound quality.
• When set to "jOFF", the sound can be adjusted to suit your
taste.
6
Press MUTE :
The power indicator on the main unit blinks red.
• Press again for sound.
RECORDER
,
PHONO , AUX or
to the
BASS TREBLE BALANCE
, and
BASS TREBLE
and
SOURCE
to mute the sound.
10
You can also use the following operation to select an input
source.
n Using the knob on the main unit
INPUT SELECTOR
Turn .
INPUT SELECTOR
• Turning switches the input source, as shown
below.
RECORDER NETWORK
AUX TUNER
PHONO
CD