Advertisement
30
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the
hemmers, it is necessary to remove the presser foot and
replace it with the attachment foot, Fig. 38.
Mount binder, edgestitcher or hemmers sliding the
attachment to the left as far as possible and tighten
screw.
The mounting slot enables you to sew as close to or
as far away from the edge as desired.
Just move the
attachment to the correct position before tightening the
mounting screw.
THE EDGESTITCHER
The edgestitcher is used in making
lace insertions, edgings and
pipings.
_____
The slots serve as guides.
To sew lace
edging to fabric, place the material you
want on top in slot, other piece in slot
4.
To trim with a wide piping, place
Fig. 38
2
3
5
the fabric in slot 4, and the fold of the piping, to the left in slot 3.
For a narrow piping, place
the fabric in slot 2 and the folded edge of the piping to the right in slot 3.
Slot 5 may be used as a guide in stitching a French seam.
Fig. 39
Fig. 40
Advertisement
