Multipoint Technology - Sony MBH10 User Manual

Multipoint technology

Use Multipoint technology to connect your headset to two Bluetooth™ devices at the
same time. For example, if you connect your headset with two phones, you can
receive calls from both phones without having to disconnect and reconnect.
If you prefer that your headset connects to just one Bluetooth™ device at any given
time, you can use Singlepoint mode instead. Singlepoint mode is enabled by default.
Before pairing your headset with a new device in Singlepoint mode, make sure that
you disconnect it from other devices.
Multipoint mode consumes more battery power than Singlepoint mode.
To connect your headset to two devices at the same time
1 Make sure that the headset is turned off and that the two Bluetooth devices
have the Bluetooth™ function turned on.
2 Press and hold down the Volume key while turning on the headset. After
Multipoint mode is activated, a yellow notification light will flash twice.
3 Pair and connect your headset to the two Bluetooth™ devices, one after the
other.
4 To deactivate Multipoint mode, press and hold down the Volume key again
while turning on the headset. After Multipoint mode is deactivated, a yellow
notification light will flash once.
In Multipoint mode, if the connection to the first Bluetooth™ device is lost when you connect
to a second device, restart your headset.
This is an Internet version of this publication. © Print only for private use.
8