To Prepare Your Computer For Networked Presentations; To Set Up Your Computer For A Wired Network Connection (Optional) - HP L1581A User Manual

Presenting from a Networked Computer

To prepare your computer for networked presentations

If you want to make presentations over a wired or wireless network connection, you
must install additional software on your computer that provides networked
presentation capabilities.
1. Be sure your computer meets the minimum system requirements:
■
Microsoft Windows 2000 or XP (Home, Professional, or Tablet PC edition)
■
32 MB of RAM
■
50 MB of free space on hard drive
■
CD-ROM drive
■
Wired Ethernet network adapter or wireless 802.11b adapter
2. Insert the software CD in the CD-ROM drive.
3. Click the option for installing the Wireless Presenter-to-Go software. Follow the
displayed instructions.
4. Select the option to install the software on a computer.
5. If you receive warning messages that state the hardware has not passed the
Windows Logo Testing, click Continue. You might need to do this more
than once.
6. Click Finish.
To set up your computer for a wired network connection
(optional)
✎
You do not have to change your computer to use the same network as the projector.
When you make a presentation using Wireless Presenter-to-Go, the software can
connect to a projector on any network.
If you are connecting to a projector through an established network, your computer
is probably ready to connect. See "To start a presentation" on page 24 to find out how
to connect to the projector.
If this is not your normal network, check with the network administrator.
18 User's Guide