conferencing, voice narrations, or simple audio recordings.
Headphone Jack
The stereo headphone jack (3.5mm) is used to connect the system's audio out signal
to amplified speakers or headphones.
Memory Card Reader
The built‐in memory card reader supports MMC/MS/SD cards used in devices like
digital cameras, MP3 players, mobile phones, and PDAs.
Power LED
The power LED will light when the PC is power‐on.
HDD LED
The hard disk LED blinks when data is being written into or read from the HDD and
Card reader.
WiFi LED
When the data is transferring, the WiFi LED will blink.
Power Switch
The power switch allows powering ON and OFF the system.
QutePC‐1010 User's Manual
16
Chapter 1