Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and
the other end to a hub or switch.
Turning on the system
1.
Connect the power adapter cable to the DC jack (DC IN) of
the QutePC-4100 series
2.
Connect the power cable to the power adapter
3.
Connect the power cable to a power outlet
4.
Press the power switch on the front panel to turn on the system
QutePC-4100 Series User's Manual
Figure 6 RJ45 connector
On/Off
DC Jack
Figure 7 Turning on the system
21
Chapter 2
RJ45